NEW Hull Design

14% more flat bottom

Rounded Nose to eliminate water spray & better turning abilities.

20% improved plaining

15% better top end speed

 

Standard Hull Specifications:

• Aluminum Welded Hull.190 5086 Bottom, Transom, & Splash Plate
• .125 5052 Sides, Bulkhead, & Bow Cap
• 5 - 2” X 2” X ¼” Aluminum T-Bars on 7’ Hulls
• 7 - 2” X 2” X ¼” Aluminum T- Bars on 7’ 6” & 8’ Hulls
• Storage Opening in Bulkhead

Approximate Hull Weights:

• 7’ Wide Hull: 30 lbs. per foot
• 7’6” Wide Hull: 35 lbs. per foot
• 8’ Side Hull: 37 lbs. per foot

Ultra-Lite Hull Specifications:

• Aluminum Welded Hull
• .125 6061 T-6 Bottom
• .125 5052 Sides, Bulkhead, Bow Cap, Transom, & Splash Plate
• 5 - 2” X 2” X ¼” Aluminum T-Bars on 7’ Hulls
• 7 - 2” X 2” X ¼” Aluminum T- Bars on 7’ 6” & 8’ Hulls
• Storage Opening in Bulkhead

Approximate Hull Weights:

• 7’ Wide Hull: 24 lbs. per foot
• 7’6” Wide Hull: 29 lbs. per foot
• 8’ Side Hull: 34 lbs. per foot
  

Tel: (800) 424-5624 • Fax: (321) 633-6625
Copyright ©2002-2005 Diamondback Manufacturing ¦ Powered by: bent technical solutions